Facebook-f Instagram
All Projects

Fairfield Inn – Little Rock, AR

Share Project

Start Date: July 2018
Completed: June 2019
Project Manager: Jason DeBlock
Master Plumber: Mike Shaw
Foreman: Thomas Kennedy
Journeyman Plumbers: Chad Johnson, Curtis Bell, Dave GuaJardo
Apprentice Plumber: Roderick Neal, Ty Oliver, Joseph Cessna, Joseph Samuel

The Fairfield Inn in Little Rock, AR, is a 114-room, wood-structure hotel with an indoor pool and kitchen. The domestic hot water is supplied by 13 200,000 btu instantaneous water heaters sending 140-degree water to the kitchen and 110 degree to the rooms. There are two roof-top, fresh-air unites serving the building along with seven split systems serving the common areas. Each room is heated and cooled by a wall-mounted, motion-activated P-Tac unit.

We began this project on July 10, 2018 and just completed it.

Back row left to right: Roderick Neal, Apprentice Plumber; Chad Johnson, Journeyman Plumber; Thomas Kennedy, Journeyman Plumber (foreman) Middle left to right: Mike Shaw, Master Plumber; Curtis Bell, Journeyman Plumber; Ty Oliver, Apprentice Plumber Front left to right: Joseph Cessna, Apprentice Plumber; Dave GuaJardo, Journeyman Plumber; Joseph Samuel, Apprentice Plumber

Related Projects

"*" indicates required fields

To request an application, fill out the following information:

Name*

Trimble

Trimble Job Site Solutions Total Station transfers CAD data to the job site via the Trimble MEP Nomad wireless hand held device. This technological leap eliminates the need for manual measurements on the job site, saving time and reducing costly errors.
Contact Us

VDC

Autodesk Fabrication CADmep and CAMduct are detailing tools used to generate production drawings such as ISO spools, coordination overlays, or 3D spatial coordination with Navis Works. The use of Building Information Modeling (BIM) eliminates the inefficiencies of the traditional method of Design-Bid-Build and two-dimensional (2D) drawings by facilitating collaboration among project team members and by illustrating the project design through three-dimensional (3D) visualization.
Contact Us

Fabrication

We design, manufacture and deliver in our 35,000 SF manufacturing facility. Ductwork and piping ranging from mechanical rooms to fixture batteries to below-grade rough-ins are prefabricated in our facility.
Contact Us

HVAC

We provide installation and maintenance for all types of HVAC equipment and systems. Our full range of capabilities include split systems, packaged RTU’s, built up AHU’s, chillers, boilers, and VAV distribution systems.
Contact Us

Plumbing

We are licensed to install and repair all types of plumbing systems including: domestic water, medical gas, sewer, storm, propane and natural gas.
Contact Us

Hydronic Piping

We can prefabricate much of our hydronic piping to improve quality and increase installation efficiency. We can install all types including steel and copper pipe for hot water, steam, condenser water and chilled water systems.
Contact Us

Value Analysis

For projects with completed designs we can provide recommendations to assist with budget or schedule challenges.
Contact Us

Design/Development

We offer a team approach to reach your design and budget goals.
Contact Us

Budgeting

We assist you in determining project feasibility by providing conceptual estimates and constructive feedback from a nationally recognized Mechanical Contractor.
Contact Us